APZ13
PT
10 days
Product Description
The Cooling Nozzle for Sewage Cooling Tower is made of ABS plastic by one-time injection molding, which has high strength and long service life. The nozzle distributes water evenly, and the working water pressure is low (the working pressure at the nozzle outlet is only 0.6H20), and the pressure adaptation range is wide, so it is not easy to block. Because it has a specially designed locking and anti-loosening device, it can be firmly connected with the water distribution pipe without falling off, which can ensure the long-term safe operation of the water distribution system. Under normal conditions, the service life of the head is 20 years.
| Material | ABS |
| Color | White |
Cause: Over long-term operation, impurities, scale, and microorganisms in the water can adhere to the inside of the nozzles or the spray holes, leading to clogging.
Symptoms: Insufficient spray water volume and uneven distribution, resulting in reduced cooling efficiency.
Solution: If the nozzles are severely clogged and cannot be cleaned and unblocked, they need to be replaced.
Cause: The nozzles may wear out or get damaged due to long-term exposure to water flow impact and corrosion.
Symptoms: The spray shape and water flow of the nozzles change, failing to meet the designed water distribution requirements.
Solution: Regularly inspect the condition of the nozzles. If they are severely worn or damaged, they should be replaced promptly.
Cause: The durability of nozzle materials is limited. When exposed to high temperatures and high humidity for a long time, the nozzles will gradually age.
Symptoms: The performance of the nozzles declines, such as reduced water flow and altered spray angles.
Solution: Even if the nozzles do not show obvious damage, they should be replaced regularly based on their service life and actual operating conditions.
Cause: Nozzle blockage, damage, aging, and deformation of the water distribution pipes can all lead to uneven water distribution.
Symptoms: The heat exchange effect of the cooling tower packing layer deteriorates. Some parts of the packing do not have enough water coverage, resulting in dry spots.
Solution: Inspect the condition of the nozzles, clean or replace the clogged or damaged ones, and check whether the water distribution pipes are tilted or deformed. If necessary, repair or replace them.
Cause: Problems with the nozzles lead to poor water flow, distribution, and spray effect of the spray water, affecting the heat exchange efficiency of the cooling tower.
Symptoms: The temperature of the cooled water does not meet the design requirements, and the system operating efficiency decreases.
Solution: Inspect the nozzles for blockages, wear, or aging. If problems are found, replace the nozzles promptly.
Cause: If the water quality of the cooling tower is poor and contains a large amount of corrosive substances, and the nozzle material is not corrosion-resistant, the nozzles will be corroded and damaged.
Symptoms: Cracks, holes, or deformation appear in the nozzles.
Solution: Replace the nozzles with materials that have better corrosion resistance, such as stainless steel or engineering plastics.
The application range is: Industrial water cooling,Air compressor, Aluminum profile processing, Steam turbine, Power generation, Tannery, Electric furnace, Freezing Series, Air conditioning cooling system
Wooden pallet.
With in 10 days.
Based on the clients' requirements, we will offer product pictures, videos, quotation,information,
engineering drawings until you satisfied with it. Warmly welcome to visit our factory.
1 Providing production schedule photos to ensure you know every process.
2 Our experienced technician are available on the phone also internet, the clients can get instance
guidance by telephone,email, online service anytime, anywhere.
3 Also can arrange experienced technician to clients site for installation guidance, commissioning and training etc.
Normally, the equipment warranty is 12 months since installation. We will keep in touch with our clients
to follow up the working condition of our machines, and offer support for maintenance.
We are the manufacturer who adopts import raw materials. It is cheap price and guaranteed quality.
We can adjustment the price according to your market demand’s changes,and also can launch a series of promotional activities in a bad economic environment.
We are specialized in producing and sells as development, methods and handling. We have 16 years experience.
Answering emails and solving questions timely. Delivery and update information on time.
Trust, good quality and service are the basic of long term business.
