The drift eliminator is the "droplet recovery station" of the cooling tower. If it is not installed properly, it is equivalent to scattering the circulating water into the sky in vain. The installation process can be broken down into five steps: "positioning → piecing together pieces → locking rods

Maintenance Guide for Cooling Tower FillerThe filler is the heart of the cooling tower and the "main battlefield" where the water film exchanges heat with the air. Scaling, aging or damage once occurs, the cooling efficiency will drop sharply, and electricity and water bills will soar simultaneously

Once the water pump of the cooling tower stops working, the entire heat dissipation chain will break. To transform "post-event repair" into "pre-event maintenance", just remember the five-character formula of "observe, measure, clean, moisten, and replace". Below, it will be broken down into four le

Guide to Selecting Cooling Tower NozzlesThe nozzle is the "last mile" that turns hot water into a uniform rain curtain. If you choose the wrong model, no matter how large the water volume is, it will be in vain - dry spots on the packing, drifting white smoke, and a sharp increase in electricity bil

In the world of cooling towers, motors are not "the bigger, the better", but "just enough and long-lasting". A wrong selection can lead to a doubling of electricity bills at best and the scrapping of two bearings in a year at worst. The following five parameters quantify "sufficiency" into verifiabl

The aluminum alloy fan blades of the cooling tower are constantly exposed to a humid, hot, salt spray and high-speed rotating environment, which makes them prone to scaling, corrosion, loosening and deformation. Dividing the maintenance work into five stages: "observation, cleaning, calibration, lub

Here’s a list of the main parts of an induced draft cooling tower and their functions:---### **1. Fan Assembly*** **Location:** Top of the tower* **Function:** Pulls (induces) air through the tower and discharges it upward* **Type:** Axial fan (commonly used)* **Includes:** Fan blades, fan hub, f

Here’s a detailed **EVAPCO Cooling Tower Maintenance Checklist** — suitable for **closed-circuit** and **open-circuit** towers. Regular maintenance helps ensure efficient operation, energy savings, and extended equipment life.---### **EVAPCO Cooling Tower Maintenance Checklist**#### **Daily /

I. Maintenance GoalsThe water collector (water separator) is responsible for intercepting water droplets larger than 0.1mm and keeping the drift rate within 0.001%. Maintaining its integrity, cleanliness and no deformation is the first line of defense for water conservation, carbon reduction and pre