You are here: Home » Blog

NEWS AND BLOG

  • 11-28-2025

    Here are the **best ways to protect a cooling-tower fan motor mount** from corrosion, vibration, and structural failure. These are the same practices used by OEMs (BAC, Marley, Evapco) and plant maintenance teams.---# ✅ **How to Protect a Cooling-Tower Motor Mount**Cooling-tower environments are **w
  • 11-28-2025

    Below is a clear, practical guide for replacing a cooling-tower fan motor — what to check, how to remove the old unit, and how to install/align the new one. I’ll keep it very field-friendly. ✔️ Cooling Tower Fan Motor Replacement – Step-by-Step Guide1. Preparation (Safety + Verification)Before touch
  • 11-28-2025

    How to calculate cooling-tower fan motor power — simple, correct, and with an exampleCore idea (one line) Step-by-step method & formulas1. Measure (or specify):* Airflow (Q) (use m³/s; if you have CFM, convert below).* Fan static pressure rise (\Delta p) (Pa; if you have inches H₂O, convert below).*
  • 11-27-2025

    why cooling tower fans have vfd
  • 11-27-2025

    A **permanent magnet (PM) cooling tower motor** is a **high-efficiency, variable-speed, direct-drive motor** designed specifically for cooling towers. These motors use **permanent magnets in the rotor** instead of induction windings, making them far more efficient—especially at low speeds—when paire
  • 11-27-2025

    Replacing a cooling tower motor is a moderate- to heavy-duty HVAC/mechanical task, and must be done carefully because of electrical hazards, heavy components, and work at height.Below is a safe, high-level overview of how the replacement process is normally done by technicians (not step-by-step mech
  • 11-27-2025

    A 2-speed cooling tower motor is a motor designed to run at two different fan speeds—typically LOW speed and HIGH speed—to match the cooling load. They are common in older towers or systems without VFDs.Below is a simple, clear breakdown. ✅ What a 2-Speed Cooling Tower Motor IsA 2-speed motor is usu
  • 11-27-2025

    A **Baldor direct-drive cooling tower motor** is a special type of motor designed specifically for cooling tower fans. Unlike belt-drive or gearbox systems, the **fan blade mounts directly to the motor shaft**, eliminating many mechanical components. Below is a clear, quick overview.
  • 11-27-2025

    If a **cooling tower motor stops working**, the fan will no longer run — and that creates several immediate and serious effects on the cooling process. Here’s what typically happens:1. Cooling capacity drops sharplyWithout the fan, **airflow stops**.No airflow = very little evaporation = **water won
  • Total 186 pages  Go to Page
  • Go
Consult Your Cooling Tower Expert
Cooling Tower Parts
COOLING TOWER PARTS SUPPLIER
OEM Brands
Quick Links
COOLING TOWER PARTS SUPPLIER
Cooling Tower Parts
OEM Brands
Quick Links
COPYRIGHT © 2024 ZHEJIANG AOSHUAI REFRIGERATION CO., LTD. ALL RIGHTS RESERVED.