Views: 0 Author: Site Editor Publish Time: 2026-01-15 Origin: Site
What is EVAPCO Cooling Tower Drift Eliminator
The cooling tower drift eliminator is an important component used in cooling towers to reduce the dispersion of water droplets with the airflow. The EVAPCO cooling tower adopts an efficient float design, which can control the float loss at an extremely low level, effectively saving water resources and reducing environmental impact.
The drift eliminator is usually installed between the fan and the fill of the cooling tower, and by changing the direction of the airflow, the entrained water droplets are captured and refluxed into the tower.
The Importance of Maintaining Cooling Tower Drift Eliminator
Regular maintenance of the EVAPCO cooling tower drift eliminator is crucial for the long-term stable operation of the cooling tower, mainly reflected in the following aspects:
1）Reduce float loss and lower water replenishment costs
2）Prevent scaling and blockage, maintain good ventilation efficiency
3）Improve heat exchange efficiency and ensure system performance
4）Extend the service life of cooling towers
If the maintenance of the float is not in place, it may lead to an increase in the float rate of the cooling tower, and even affect the fan and surrounding equipment.
Common Problems with EVAPCO Cooling Tower Drift Eliminator
1. Scale or blockage of the drift eliminator
During long-term operation, impurities, algae, or scale in the water will adhere to the surface of the cooling tower drift eliminator, reducing water capture efficiency.
2. The drift eliminator is aging or deformed
High temperature, ultraviolet radiation, and chemical water treatment agents may cause the material of the float to age, become brittle, or deform.
3. Loose or misaligned installation
Improper vibration or maintenance may cause the float to shift, resulting in local airflow short circuits.
It is recommended to inspect the cooling tower float every 3-6 months, including:
1）Are there any damages or cracks
2）Is there obvious scaling or biological contamination present
3）Is the installation position stable
2. Clean the float
According to the water quality, regularly clean the cooling tower drift eliminator:
1）Mild dirt:
Rinse with clean water or low-pressure water
2）Severe scaling:
Use neutral or specialized cleaning agents (avoid strong acids and alkalis)
3. Replace damaged components
If severe aging or structural damage is found in the float, the original or compatible EVAPCO float should be replaced in a timely manner to ensure performance.
How To Determine If The Drift Eliminator Needs To Be Replaced
1）The floating water has significantly increased, and water mist has appeared outside the tower
2）Abnormal increase in water replenishment for cooling tower
3）The float is brittle, broken, or unable to be cleaned thoroughly
Timely replacement can avoid greater operational losses.
Advantages of EVAPCO Original Drift Eliminator
Choosing the EVAPCO original cooling tower drift eliminator has the following advantages:
1）Efficient and low float rate design
2）High temperature and chemical resistant materials
3）Perfect match with EVAPCO cooling tower
4）Long service life and low maintenance cost
Summary
The EVAPCO cooling tower drift eliminator is a key component that ensures efficient and environmentally friendly operation of the cooling tower. Through scientific inspection, cleaning, and replacement strategies, the effectiveness of the cooling tower drift eliminator can be significantly improved, operating costs can be reduced, and equipment lifespan can be extended.
